Skip to content Skip to sidebar Skip to footer


A budget-friendly DIY farmhouse table is a great way to add rustic charm to your home without breaking the bank. Using materials like four wood planks, two 2x4s, three 3x3s, two 1×0.5 pieces, a plywood sheet, and basic household tools, you can build a sturdy and stylish table that enhances any dining space.

How to build a farmhouse table

Materials: 

  • x4 planks
  • x2 2×4
  • x3 3×3 
  • x2 1x.5
  • x1 piece of plywood 
  • stain
  • sanding blocks

Step 1: Prep and Measure

How to build a farmhouse table

Start by deciding on the size of your farmhouse table based on your space. I measured and settled on 4 feet wide, 5 feet long, and 32 inches high—slightly taller than my old 30-inch table but still within standard height.

Step 2: Create the Chevron Tabletop

How to build a farmhouse table

To give my DIY farmhouse table a unique look, I designed a chevron-style top. First, I cut the plywood base to 48″ x 60″ as the foundation. Then, I selected 1″-thick pine planks with natural knots for character.

I marked the plywood’s centerline and began placing the planks at a 45-degree angle, starting from the middle and angling outward. After setting them in place, I marked where they overhung the plywood edges and trimmed them for a clean fit.

Step 3: Attach and Secure the Planks

How to build a farmhouse table

After ensuring a snug fit, I applied wood glue to the plywood and placed the planks. To secure them, I added heavy objects for weight and let it sit overnight

Step 4: Start the Legs

How to build a farmhouse table

While the glue set, I began working on the legs. I purchased a 3-ft galvanized pipe, 1 inch in diameter, and spray-painted it black. This pipe would go between the two legs for added support.

For the legs, I cut 4x4s to 3 feet long, ensuring they were sturdy but not too wide to interfere with seating. I also cut another 4×4 to 25 inches for the center post. When combined with the base height and table thickness, this gave a total height of 32 inches. I screwed the two 4x4s together, creating a T-shape. Then, I cut a 2×4 to 48 inches and attached it underneath the table top, forming an H-shape base.

Next, I added angled details to the legs by cutting a 2×4 at a 45-degree angle, making each piece 18 inches long. This connected the center post to the base and the table top, forming an X design.

Finally, I screwed the angled 2x4s into the H-shaped base, completing the farmhouse-style legs.

Step 5: Drill Hole

How to build a farmhouse table

To add a unique detail, I drilled a hole slightly larger than 1 inch in the center of the X of the legs. Using a drill bit, I carefully drilled through the wood just enough to allow the galvanized pipe to slide through from one side to the other.

Step 6: Framing

How to build a farmhouse table
How to build a farmhouse table

To finish the edges of the tabletop, I added a frame using 1-inch wide by 1/2-inch thick pine boards. I cut them to the length of the table and made 45-degree cuts at the corners for a flush, clean look. I then nailed the frame in place around the wood planks.

Step 7: Sanding, Staining, and Sealing

How to build a farmhouse table

After framing, I sanded the tabletop to smooth out any uneven areas using an electric sander. Once the surface was flat, I applied Minwax Classic Gray stain with a rag, wiping along the wood grain to avoid streaks. I stained the legs more thoroughly and wiped away any drips. After the stain dried, I sealed the table with clear lacquer, applying two coats with wide strokes to ensure full coverage and protection.

Step 8: Assemble

How to build a farmhouse table

Once everything was stained and dry, I connected the tabletop to the legs. I cut small squares from 2x4s and placed them on the underside of the table to create a secure foundation. I pushed the galvanized pipe through the drilled hole and screwed the end cap to hold the pipe in place, connecting the two legs.

How to build a farmhouse table
How to build a farmhouse table
How to build a farmhouse table
How to build a farmhouse table
How to build a farmhouse table
How to build a farmhouse table

With the dark gray stain and angled wood planks, this table takes on a contemporary twist while maintaining the charm of a classic farmhouse design. The addition of galvanized pipes and the X-shaped legs brings extra detail and uniqueness, elevating the table’s overall look.





Source link